| Page 1
|
| Identity - Tripoly Glaze KA |
| SECTION I |
Manufacturers Name:
Stevens Car Care Products, Inc. |
Emergency Telephone Number:
(440) 953-2900 |
Address:
36542 Vine St.
Eastlake, Ohio 44095 |
Telephone Number for Information:
(440) 953-2900 |
Date Prepared:
6/18/09 |
Signature of Preparer (optional)
|
| SECTION II - HAZARDOUS
INGREDIENTS/Identity Information |
| Hazardous Components (Specific
Chemical Identity; Common Name(s) |
| |
|
OSHA PEL |
ACGIH TLV |
Other Limits Recommended |
% (Optional) |
| ALPHATIC HYDROCARBON |
CAS. NO. |
8052-41-3 |
100 PPM |
COMBUSTIBLE |
|
| KEROSENE |
CAS. NO. |
8008-20-6 |
100 PPM |
COMBUSTIBLE |
|
| DIMETHYLPOLYSILOXANE |
CAS. NO. |
63148-82-9 |
N/A |
|
|
| WATER |
CAS. NO. |
7732-18-5 |
N/A |
|
|
| CALCINED KAOLIN |
CAS. NO. |
66402-28-1 |
10 MG/M3 |
IRRITANT |
|
| CARNAUBA WAX |
CAS. NO. |
N/A |
|
NONE |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| The precise composition of this mixture is
proprietary information. A complete disclosure will be
provided to a physician or nurse in the event of a medical
emergency. |
| SECTION III -
Physical/Chemical Characteristics |
| Boiling Point |
212 F |
Specific Gravity |
< 1 |
| Vapor Pressure (mm Hg.) |
N/A |
Melting Point |
|
| Vapor Density (AIR=1) |
N/A |
Evaporation Rate (Butyl Acetate = 1) |
N/A |
Solubility in Water
N/A |
Appearance and Odor
TAN LIQUID |
| SECTION IV - Fire and
Explosion Hazard Data |
Flash Point (Method Used)
200 F TOC |
Flammable Liquids
|
LEL
N/A |
UEL
N/A |
Extinguishing Media
Water, Fog, CO2 & Dry Chemicals |
Special Fire Fighting
Procedures
Wear full protective clothing, including helmet, self contained
positive pressure or pressure demand breathing apparatus,
protective clothing and face mask. |
Unusual Fire and Explosion
Hazards
This product is combustible at high temps. Do not cut,
weld, solder, drill, grind, or expose containers to heat, flame,
sparks, or other sources of ignition. |
Page 2
| SECTION V - Reactivity Data |
| Stability |
[ ] Unstable |
Conditions to Avoid |
| [X] Stable |
N/A |
Incompatability (Material to
Avoid)
STRONG OXIDIZERS, STRONG ACIDS |
Hazardous Decomposition or
Byproducts
OXIDES OR CARBON AND OTHER HAZARDOUS CHEMICALS. |
| Hazardous Polymerization |
[ ] May Occur |
Conditions to Avoid |
| [X] Will Not Occur |
N/A |
| SECTION VI - Health Hazard
Data |
| Route(s) of Entry |
[X] Inhalation |
[ ] Skin |
[ ] Ingestion |
Health Hazards (Acute and
Chronic)
N/A |
| Carcinogenicity |
NTP? |
IARC Monographs? |
OSHA Regulated? |
Signs and Symptoms of Exposure
May cause redness, tearing or blurring of vision. May
cause skin irritation. May be irritating to the respiratory
system. May cause irritation of the mucous membranes. |
Medical Conditions Generally
Aggravated by Exposure
|
| Emergency and First Aid
Procedures |
| Eyes: |
WASH WITH WATER FOR 15 MINUTES, LIFTING UPPER AND
LOWER LIDS OCCASIONALLY. CALL A PHYSICIAN. |
| Skin: |
WASH WITH SOAP AND WATER. IF IRRITATION
PERSISTS, SEEK MEDICAL PHYSICIAN. |
| Inhalation: |
MOVE TO FRESH AIR. |
| Ingestion: |
DRINK TWO GLASSES OF WATER. DO NOT INDUCE
VOMITING. CALL A PHYSICIAN. |
| SECTION VII - Precautions for Safe
Handling and Use |
Steps to be Taken in Case Material is
Released or Spilled
REMOVE SOURCES OF IGNITION. BLOCK ANY POTENTIAL ROUTES TO
WATER SYSTEM. |
Waste Disposal Method
ABSORB SPILL WITH INERT MATERIAL. SHOVEL MATERIAL INTO
APPROPRIATE CONTAINER FOR DISPOSAL. |
Precautions to be Taken in Handling and
Storing
|
| SECTION VIII - Control
Measures |
Respiratory Protection (Specify
Type)
N/A |
| Ventilation |
Local Exhuast - |
Special - |
| Mechanical (General) - |
Other - |
Protective Gloves
IMPERVIOUS GLOVES |
Eye Protection
CHEMICAL SAFETY GOGGLES |
Other Protective Clothing or
Equipment
|
Work/Hygenic Practices
|
|