Valet
Mode
Valet mode is used to prevent the alarm system from arming or
triggering. The alarm should be put into valet mode when the vehicle
is being serviced. It may also be used to manually disarm in the
event of loss or damage to the remote control. To put the alarm into
valet mode, turn ignition on and flip the valet switch. To turn
valet mode off, repeat the process. The valet switch is usually
located in a hidden location inside your vehicle (ask the
dealer/installer for location).
Silent Arming
1. Dealer can permanently program for silent arming or you can:
2. Press button 1 for 3 seconds with ignition
on. To confirm silent arming, siren will emit two chirps. Repeat
procedure to cancel silent arming; siren will emit one chirp.
Last Door Arming Countdown for 30
Seconds
To confirm this, the alarm will emit 2 chirps and 2 flashes after 10
seconds and 20 seconds. After 30 seconds the alarm will be armed
with 1 chirp and 1 flash. The L.E.D. indicator will begin to flash
rapidly for 30 seconds.
Alarm Memory
If the alarm is set off in your absence, the L.E.D. will flash red
and four alarm chips will sound when the alarm is disarmed. The
number of red L.E.D. flashes will indicate which alarm zone was
triggered.
2 flashes: Door zone
3 flashes: Shock sensor
4 flashes: Pre-warn
5 flashes: Trunk zone
7 flashes: Valet switch
L.E.D. Status Indicator
Flashing red: Armed mode
Off: Disarmed mode
On constant red: Valet mode
Rapidly red flashing: Last door arming
countdown
Smart Rearm™ (Programmable)
If you disarm the alarm and do not open the door within 30 seconds,
the alarm will automatically rearm. This will be confirmed by 2
chirps and two flashes of parking lights after 10 seconds and then
again after 20 seconds.
Optional Features (May be available
to most vehicles at extra charge)
REMOTE DOOR LOCK AND UNLOCK:
The alarm can be interfaced with your vehicle's power locks. This
feature will lock the vehicle's doors when the system is armed. It
will also unlock the doors when the system is disarmed. The remote
lock and unlock feature will operate in valet mode, always providing
keyless convenience.
IGNITION CONTROLLED LOCK AND UNLOCK:
When the ignition lock and unlock feature is installed, the
vehicle's doors can lock automatically when the vehicles ignition is
turned on and automatically unlock when the ignition is turned off. |
